eInfochips is a leading provider of IP driven silicon design and verification services and solutions with capabilities extending from spec-silicon-system spanning front- end and FPGA design, ASIC/SoC verification, physical design and verification, ASIC prototyping (pre-silicon validation) and post-silicon validation across 180 ~ 45nm chips and industry-standard design and verification IP development. eInfochips offers semiconductor IP development in OVM, URM, RVM, VMM and AVM methodologies employing SystemVerilog, e, SystemC and Vera HDL. Our Design Quality Engineers and Process Analysts are trained on DO-254 (Avionics standards) by approved trainers enabling us to provide flight critical applications ASIC/SoC/FPGA Design & Verification services. eInfochips’ ASIC physical design expertise covers RTL synthesis, floor planning, place & route, clock tree synthesis, physical verification and STA on 45nm, 65nm, 90nm, 130nm, 180nm technologies. Our comprehensive domain expertise in Networking, Automotive, Avionics, Wireless, Consumer, Semiconductor, Video and Storage qualifies us as your ideal consultant in ASIC Design and Verification Services.

Phone: +91-79-2656 3705

Category: Service Providers / Integrated Circuit Design and Consulting

Edwards is a leading global supplier of integrated solutions for the manufacture of semiconductors, flat panel displays, LEDs and solar cells and a leader in vacuum technology for industrial, scientific, process and R&D applications. The company employs around 3,600 people worldwide in the design, manufacture and support of high technology vacuum and exhaust management equipment. Edwards invented the concept of the low-maintenance, cost-effective, commercial oil-free ‘dry’ vacuum pump and offers a wide range of other pumping technologies, and related products, supported by an international sales and service organization.

Phone: +44 (0) 8459 21 22 23

Category: Service Providers / Integrated Circuit Design and Consulting

A2E is a product based electronics design services company dedicated to the delivery of complex System, Hardware, FPGA, PCB and Embedded Software design to the electronics industry.

Phone: +44 (0)1506 463 393

Category: Service Providers / Integrated Circuit Design and Consulting

4i2i is an award winning supplier of video codecs to the broadcast market. We pride ourselves on offering the best video quality available, in a cost effective single device implementation. Our IP cores have been successfully implemented in both ASICs and FPGAs.

Phone: +44 (0)1224 793570

Category: Service Providers / Integrated Circuit Design and Consulting

NanoWattICs is an IC design company. Our main expertise is in the area of ultra-low-power mixed-signal ASICs using Bulk/SOI CMOS, HV CMOS-compatible and BiCMOS technologies, particularly for high-reliability applications. One characteristic that really set us apart from the rest of the design companies world-wide is the “know how” of designing power "aware" custom CMOS analog ICs by optimizing the design through architecture selection and the exploration of the design space, particularly the best operating region (weak inversion or subthreshold, moderate inversion, or strong inversion) for each transistor involved. We have mastered and automated this technique, which combined with the use of physically-based MOS models (such as EKV and ACM) for transistor dimensioning, allow us to customize the best ASIC for your application with rapid time-to-market.

Phone: 604-817-9923

Category: Service Providers / Integrated Circuit Design and Consulting

Analog & mixed-signal standard parts and expert custom design services. Our design services specialize in low volume early stage R&D efforts. Our standard parts and design expersie target the following applications: Fully customer analog & mixed-signal ASICs including ICs for extreme environmental conditions Extremely low current and/or high voltage Implantable biological electronics including Neural recording & stimulation arrays Nerual, EEG, EKG & EMP IC's Custom on-chip sensor systems including Specialty optical sensors Magnetic telemetry and inductive links including Custom RFID systems

Phone: 847-236-1960

Category: Service Providers / Integrated Circuit Design and Consulting

Sysacom is dedicated to FPGA and PCB design. Our firm is driven by a team of creative solution-oriented electronic designers. We make use of many tools and products from the major player such as PADS, XILINX, PCAD, FREESCALE, ALTERA, CADENCE, ORCAD, TEXAS INTRUMENTS, ANALOG DEVICES and PROTEL.

Phone: 450-585-6396

Category: Service Providers / Integrated Circuit Design and Consulting

CML Microcircuits has developed to become a world-leader in the design, development and supply of low-power analogue, digital and mixed-signal semiconductors for telecommunications systems worldwide. With its ISO 9001: 2000 certified design, production and marketing facilities and its truly global network of over one-hundred accredited distributors and representatives, CML offers a high-quality product backed by a wealth of design experience; and the on-going availability of ‘local-knowledge’ technical, applications and commercial support. CML is the main distributor in Europe (Excluding: Germany, Austria and Switzerland) for Hyperstone, a fabless semiconductor company offering a wide range of microprocessor and microcontroller products based on unified RISC/DSP architecture.

Phone: 336 744 5050

Category: Service Providers / Integrated Circuit Design and Consulting

Canadian manufacturer of high quality Industrial Battery Chargers, DC-AC Inverters, AC-DC Rectifiers, Precision AC-DC Magnet Power Supplies, UPS Systems and other Custom Designed Power Conversion equipment. Facility certified to ISO9001.

Phone: (905) 813-8900

Category: Service Providers / Integrated Circuit Design and Consulting

We specialize in Electronics Design Automation (EDA) software. Our products enable an Electronic System Level (ESL) of abstraction and facilitate better team-based collaboration, Project Data Management (PDM) and Design Flow Management (DFM). We also pr

Phone: 604 739 8534

Category: Service Providers / Integrated Circuit Design and Consulting