IPC Standards for Reinforcement Materials

Loading... Please wait...

IPC Specification Tree

Electronics Assembly:

Process Support

Optoelectronics

Advanced Packaging

Terms and Definitions

Circuit Board Design & Fabrication:

Interface Design

Media Training:

Electronics Assembly

Defect and Photo Albums

Circuit Board Fabrication

Reinforcement Materials

IPC-SG-141
IPC-A-142
IPC-QF-143
>> IPC-1731
IPC-4110
IPC-4121
IPC-4130
IPC-4411
IPC-4412

USD $52.00 IPC 4110 Specification and Characterization Methods for Non Woven Cellulose Based Paper for Printed Boards

IPC-4110 determines the nomenclature, chemical and physical requirements of paper made from cellulose fibers for PWB fabrication. IPC-4110 also includes specification sheets for selecting and purchasing these materials...

Compare
USD $52.00 IPC 4121 Guidelines for Selecting Core Construction for Multilayer Printed Wiring Board Applications

IPC-4121 provides industry-approved guidelines for selecting core constructions for multilayer printed wiring boards (PWBs). The specification sheets in the document categorize the different core constructions by laminate...

Compare
USD $52.00 IPC 4130 Specification and Characterization Methods for Nonwoven "E" Glass Mat

IPC-4130 determines the nomenclature, definitions and requirements for materials made from nonwoven "E" glass fibers. IPC-4130 also includes specification sheets for selecting and purchasing these materials. 14 pages...

Compare
USD $93.00 IPC 4411A Specification and Characterization Methods for Nonwoven Para Aramid Reinforcement

IPC-4411A covers the nomenclature, definitions and requirements for reinforcement made from nonwoven para-aramid fibers. Para-aramid reinforcement is primarily used in PCBs for HDI and high speed-high frequency applications...

Compare
USD $62.00 IPC 4412A Specification for Finished Fabric Woven from "E" Glass for Printed Boards

IPC-4412A covers the classification and requirements for finished fabrics woven from "E" glass fiber yarns. These yarns are formed from filaments of electrical-grade glass and are intended as reinforcing materials in...

Compare
USD $52.00 IPC A 142 Specification for Finished Fabric Woven from Aramid for Printed Boards

IPC-A-142 covers finished fabrics woven from aramid yarns that are intended as reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by this specification are plain weave. 9 pages...

Compare
USD $52.00 IPC SG 141 Specification for Finished Fabric Woven from "S" Glass for Printed Boards

IPC-SG-141 covers the classification and requirements for finished fabrics woven from "S" glass, electrical grade glass fiber yarns intended as a reinforcing material in laminated plastics for electrical and electronic use...

Compare

NEW PUBLICATIONS!

IPC SG 141 Specification for Finished Fabric Woven from "S" Glass for Printed Boards

USD $52.00

Choose Options
IPC A 142 Specification for Finished Fabric Woven from Aramid for Printed Boards

USD $52.00

Choose Options
IPC 4412A Specification for Finished Fabric Woven from "E" Glass for Printed Boards

USD $62.00

Choose Options
IPC 4411A Specification and Characterization Methods for Nonwoven Para Aramid Reinforcement

USD $93.00

Choose Options
IPC 4130 Specification and Characterization Methods for Nonwoven "E" Glass Mat

USD $52.00

Choose Options

All prices are in USD. Copyright 1997-2012 Electronics.ca Publications.

| About Us | Contact us | Ordering Information | RSS | Industry Resources | Media Kit | Terms and Conditions | Privacy policy |

Electronics.ca™ is a global research network serving the industry, corporations and investment banks.
All material on this site is protected by international copyright laws and use of this site is subject to our Terms & Conditions.